Thermoelectric Cooler
ZC2025123001
The General Series of Peltier Modules (PMs) is designed for the thermal management industry. The ZC2025123001 Peltier Modules is a high-performance and highly reliable with 241 couple and 6.0Amp module. Constructed from bismuth telluride semiconductor material and thermally conductive Al2O3 substrates.
PRODUCT SPECIFICATIONS
1.Technical Specifications
Specifications |
| |
Hot Side Temperature (°C) | 25 | 50 |
Vmax (Volts) | 30.2 | 34.3 |
Imax (Amps) | 6.3 | 6.0 |
Qmax (Watts) | 93.6 | 108 |
Delta Tmax (°C) | 72 | 83 |
ACR (Ω) | 4.1±10% | |
2.Performance Curve
3.Dimension information (unit:mm)
Installation Requirement
- - To achieve maximum performance, ensure adequate heat dissipation on both side of TEC.
- - Ensure sufficient flatness and parallelism on contact surface as required.
- - Ensure the TEC is fastened with evenly balanced radial clamping pressure.
- - Our standard products are developed based on our accumulated production experience and technical summaries. They perfectly address clients’ demands on
Safety & Warning
- - To ensure good thermal grease performance, there should be no bowing of either surface - due to torquing.
- - To prevent bowing, apply less torque if one or both surfaces are less than 3.18 mm thick copper or 6.35 mm thick aluminum.
- - Don’t exceed the Imax or Vmax when operating.
- - Don’t exceed the max operating temperature 80Con l
If this specification fits your products, you may download and save this page.tim
